Data Sheet

2.2
270
Further information at www.HellermannTyton.co.uk/insulation
Date of issue: April 2016
Insulation
Heat Shrinkable Moulded Shapes
MATERIAL
Polyolefin, cross-linked (PO-X)
Colour Black (BK)
Shrink Ratio up to 3:1
Minimum Shrink Temperature +135 °C
Operating Temperature -55 °C to +80 °C
Dielectric Strength 15 kV/mm
Flammability ASTM D635
End caps are suitable for use on both polymeric and paper insulated,
lead jacketed cables which may include aluminium or steel armouring.
Features and Benefits
• Seal cables during storage or transportation
• Insulating cap for live LV cables (0.6/1kV)
• Adhesive lining for excellent environmental seal
• High shrink ratio to minimise number of sizes needed
• Outer end seal marked with lightning flashes to indicate live circuit
• Can be fitted with air valves for pressurised cable applications
• High shrink ratio to minimise number of sizes needed
End Caps
The appropriate end cap for every cable diameter, and cable types.
Helashrink 1600 Series, low voltage
a: Expanded form (supplied)
b: Fully recovered form (after heating)
TYPE
Bundle
Ø min.
Bundle
Ø max.
ØH
min.
a
ØH
max.
b
P ±
10%
HW ±
20% Article-No.
1612-1-B5W2 4.0 8.0 10.0 4.0 33.5 2.0 416-12046
1613-1-B8W 6.5 16.0 20.0 6.0 55.3 2.3 416-13060
1602-1-B5W2 10.0 20.0 23.0 9.4 64.0 2.0 416-02008
1614-1-B5W2 16.0 32.0 40.0 15.0 90.0 3.0 416-14047
1615-1-B5W2 26.0 51.0 63.0 25.0 143.0 3.3 416-15035
1617-1-B5W2 32.0 61.0 76.0 30.0 158.0 4.0 416-17033
1616-1-B5W2 48.0 80.0 100.0 45.0 162.0 4.0 416-16053
1609-1-B5W2 65.0 110.0 120.0 60.0 150.0 4.0 416-09000
1610-1-B5W2 90.0 135.0 160.0 82.0 146.0 4.0 416-10000
All dimensions in mm. Subject to technical changes.
For Material / Adhesive information
please refer to page 244.