Datasheet

Material Data Sheet LVK
The LVK Heat-Shrink Connection Fitting is used for the universal connection of non-reinforced plastic cables and lines made of PVC, PE and VPE.
It is suitable for use with press-fit and screw connectors on aluminium and copper cables.
The LVK Heat-Shrink Connection Fitting may only be used for low-voltage connections.
The permissible rated voltage of 0.6/1.0 (1.2) kV must be observed !
Technical datas:
Material : Polyolefin cross-linked,
with thermoplastic adhesive
Color : Black
Operating temperature : From -55 ° C to +110 ° C
Minimum shrink temperature : +120 ° C min.
Length changes after shrinking : From 0 to -10%
Shrink Ratio : Up to 4: 1
Melting point adhesive : + 105 ° C
Specifications : Based on DIN EN 50393 (VDE 0278-393)
and DIN EN 60684-3-247 (VDE 0341-3-247)
Inner sleeve Outer sleeve Test method
Dielectric strength : >20 kV/mm >20 kV/mm IEC 243
Contact resistance
: 10
14
Ohm.cm 10
14
Ohm.cm
IEC 93
Tensile strength : >14 MPa >14 Mpa ASTM D2671
Elongation : >400% >400% ASTM D2671
Fire spread : not self-extinguishing ASTM D 876-95a
Oil resistance : very well ISO 175-99
Ø D min. a Ø D max. b Length Ø D min. a Ø D max. b Length
380-04005 LVK-5x1.5-6 5 1,5-6 12 3 70 48 12 250
380-04006 LVK-5x1.5-16 5 1,5-16 19 3.2 125 48 12 450
380-04007 LVK-5x6-25 5 6-25 22 6 125 55 16 500
380-04008 LVK-4x16-50 4 16-50 22 6 170 55 16 550
380-04009 LVK-4x25-95 4 25-95 33 8 250 75 20 800
380-04010 LVK-4x25-150 4 25-150 33 8 250 105 25 800
380-04011 LVK-4x95-300 4 95-300 40 12 280 130 35 900
All dimensions in mm. / Subject to technical changes.
D: Inside diameter
a: Delivery dimension
Supplied as a set (inner sleeves, outer sleeve, cleaning cloth, emery cloth, installation instructions)
Press and screw are not included !
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
This information is based on our experience and does not imply suitability without prior testing.
We recommend using to test our products for special applications in their own experiments. A legally binding guarantee
certain properties can not be derived from our information.
PM.V01.0/30.09.14-hs
b: Dimension after full shrinking
Article
No.
Type
Number
of inner
sleeves
Inner sleeve
Lead cross
section (mm²)
from-to
Type designation and technical data
Outer sleeve