Datasheet

Type HIS-A
Material Polyolefin, cross-linked (POX)
Shrink Ratio 3:1
Longitudinal change
after shrinkage
-10% max.
Minimum Shrink
Temperature
+100 °C
Operating
Temperature
-55 °C to +125 °C
Softening Point
Adhesive
+85 °C
Insulation Class A (VDE 0530)
Dielectric Strength 15 kV/mm according to IEC 60684 P2
Flammability UL224 VW-1 (except clear)
Article-No. Type
Supplied
Ø D
Recov.
Ø d
Wall
(WT) nom.
Pack Cont.
(m) Colour
308-10300
HIS-A-3/1
3.0 1.0 1.00 10 Black (BK)
308-10303
HIS-A-3/1
3.0 1.0 1.00 10 Transparent (CL)
308-10600
HIS-A-6/2
6.0 2.0 1.00 5 Black (BK)
308-10603
HIS-A-6/2
6.0 2.0 1.00 5 Transparent (CL)
308-10900
HIS-A-9/3
9.0 3.0 1.40 5 Black (BK)
308-10903
HIS-A-9/3
9.0 3.0 1.40 5 Transparent (CL)
308-11200
HIS-A-12/4
12.0 4.0 1.80 5 Black (BK)
308-11203
HIS-A-12/4
12.0 4.0 1.80 5 Transparent (CL)
308-11800
HIS-A-18/6
18.0 6.0 2.25 4 Black (BK)
308-11803
HIS-A-18/6
18.0 6.0 2.25 4 Transparent (CL)
308-12400
HIS-A-24/8
24.0 8.0 2.50 3 Black (BK)
308-12403
HIS-A-24/8
24.0 8.0 2.50 3 Transparent (CL)
All dimensions in mm. Subject to technical changes.
Heat Shrinkable Tubing
251
2.1
Insulation Products
• HIS-A - with adhesive liner
Features and Benefits
HIS-A is dual wall tubing with a 3:1 shrink
ratio. The inner wall melts when heated and
is forced into gaps. When the tubing cools
the adhesive forms a seal against moisture
and protects the components. HIS-A is now
available in black and clear and comes in
6 sizes covering a wide range of applications
due to its 3:1 shrink ratio.
Application
• Forms a seal against moisture
• Protection against corrosion and
mechanical abrasion
HIS-A - with adhesive liner.
Heat Shrinkable Tubing 3:1
on a Reel
Please note! Not all products listed on this page may have this approval.
For product specific approvals please refer to the Appendix.
Material Data
Technical Table
Date of issue: April 2011