Data Sheet

1.0
24
Further information at www.HellermannTyton.co.uk/fi xings
Date of issue: April 2016
Material Specifi cation Overview
Cable Ties and Fixings
Material Information
MATERIAL
Material
Shortcut
Operating
Temperature Colour** Flammability
Material
Properties*
Material
Specifi cations
Aluminium-alloy AL -40 °C to +180 °C
Natural
(NA)
• Corrosion resistant
• Antimagnetic
Chloroprene CR -20 °C to +80 °C Black (BK)
• Weather-resistant
• High yield strength
Ethylene
Tetrafl uoroethylene
E/TFE -80 °C to +170 °C Blue (BU) UL94 V0
• Resistance to radioactivity
• UV-resistant, not moisture sensitive
• Good chemical resistance to:
acids, bases, oxidizing agents
Polyacetal POM
-40 °C to +90 °C,
(+110 °C, 500 h)
Natural
(NA)
UL94 HB
• Limited brittleness sensitivity
• Flexible at low temperature
• Not moisture sensitive
• Robust on impacts
Polyamide 11 PA11
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL94 HB
• Bio-plastic, derived from vegetable oil
• Strong impact resistance at low
temperature
• Very low moisture absorption
• Weather-resistant
• Good chemical resistance
Polyamide 12 PA12
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL94 HB
• Good chemical resistance to:
acids, bases, oxidizing agents
• UV-resistant
Polyamide 4.6 PA46
-40 °C to +150 °C
(5000 h), +195 °C
(500 h)
Natural
(NA),
Grey (GY)
UL94 V2
• Resistance to high temperatures
• Very moisture sensitive
• Low smoke sensitive
Polyamide 6 PA6 -40 °C to +80 °C Black (BK) UL94 V2 • High yield strength
Polyamide 6,
high impact modifi ed
PA6HIR -40 °C to +80 °C Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher fl exibility at low temperature
Polyamide 6.6 PA66
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK),
Natural
(NA)
UL94 V2 • High yield strength
Polyamide 6.6,
glass-fi bre reinforced
PA66GF13,
PA66GF15
-40 °C to +105 °C Black (BK) UL94 HB
• Good resistance to: lubricants, vehicle
fuel, salt water and many solvents
Polyamide 6.6,
heat and UV stabilised
PA66HSW -40 °C to +105 °C Black (BK) UL94 V2
• High yield strength
• Modifi ed elevated max. temperature
• UV-resistant
Polyamide 6.6,
heat stabilised
PA66HS -40 °C to +105 °C
Black (BK),
Natural
(NA)
UL94 V2
• High yield strength
• Modifi ed elevated
max. temperature
Polyamide 6.6,
high impact modifi ed
PA66HIR
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher fl exibility at low
temperature
Polyamide 6.6,
high impact modifi ed, heat
and UV stabilised
PA66HIRHSW -40 °C to +110 °C Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher fl exibility at low temperature
• Modifi ed elevated max. temperature
• High yield strength, UV-resistant
Polyamide 6.6,
high impact modifi ed, heat
stabilised
PA66HIRHS -40 °C to +105 °C Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher fl exibility at low temperature
• Modifi ed elevated max. temperature
Polyamide 6.6,
high impact modifi ed, scan
black
PA66HIR(S)
-40 °C to +80 °C,
(+105 °C, 500 h)
Black (BK) UL94 HB
• Limited brittleness sensitivity
• Higher fl exibility at low temperature
Polyamide 6.6,
UV-resistant
PA66W
-40 °C to +85 °C,
(+105 °C, 500 h)
Black (BK) UL94 V2
• High yield strength
• UV-resistant
Tefzel
®
is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel
®
-Tie.
In additon to Tefzel
®
from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
* These details are only rough guide values. They should not be regarded as a material specifi cation and are no substitute for a
suitability test. Please see our datasheets for further details.
HF = Halogenfree
LFH = Limited Fire Hazard
RoHS = Restriction of Hazardous Substances