CERAMIC WALL HEATER WITH LED DISPLAY 2000W USER MANUAL Model Numbers: HWH2000 BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
IMPORTANT Read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
• Do not use the appliance outdoors. • Do not use if you have wet or damp hands. • Never use the appliance on or near hot surfaces. • Do not operate the product if it is dropped, damaged or showing signs of product malfunction. • Do not operate the product with a damaged plug or cord. Return the complete product to the place of purchase for inspection, refund or replacement.
• Do not use the heater in areas such as garages where petrol or other flammable substances are used or stored. Do not use the heater when flammable sprays, liquids, solvents and glues or flammable fumes may be present. • Keep combustible materials such as furniture, pillows, bedding, clothes and curtains at least 1m away from the appliance. • Avoid touching the heater body whilst the heater is on.
GETTING STARTED Before first use • Unpack: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the event that the packaging is to be disposed of , please recycle all packaging materials where possible.
the length of the bare parts should be 10 mm. 4. Mount the fan heater to the wall . Make sure the two holes located on the back of the heater do aim at the above two screws, then push the heater backwards to the wall, and then downwards till the unit is stable. THE CONTROLS ON/OFF Press the ON -OFF switch to switch the appliance ON (I) or OFF (O).
FAN AND HEATING (BY CONTROL PANEL) Step 1: Press the button to select one of the following mode Touch the One Times the fan working without heating. Touch the two times the fan+ Heating working on Half power. ( 1000W) Touch the three times the fan+ Heating working on Full power. ( 2000W) Touch the four times the fan+ swing+ Heating working on Full power.
• Press again to switch off the appliance. Stops by going into standby (the fan stops 30 seconds after the stand-by). TEMPERATURE CONTROL (ONLY BY REMOTE CONTROL) • • Press to switch on the remote control. Press + or – to set the setting temperature from 10°C to 49°C(the light °C is on). If room temperature 15°C, setting temperature 25°C, the display as the picture.
Turn-off in timer off running mode • Press • When the appointment power-off time arrived, the product will automatically turns off. The to set the timer off time in 1-12 hours (the light is on). default setting temperature is 23°C. • For example to set appointment turn-off time to 8 hours. 5 seconds SETTING THE CURRENT TIME (ONLY BY REMOTE CONTROL) • • Press to switch on the appliance Press SET to display the hour. • Press + or – to set the current hour (00 to 23).
SETTING THE WEEKLY PROGRAM (ONLY BY REMOTE CONTROL) The current time must be set before any programming. • Press to switch on the appliance. 1. Press P to enter into weekly program setting (the light P is on). 2. Press DAY to set the day of program activation (d1, d2,d7...). 3. Press EDIT to set the time period number (P1, P2,...P6). 4. Press TIME/ON to set the turn-on time (00, 01, 02 ..., 24) . Cannot set to minutes. 5. Press TIME/OFF to set the turn-off time (00, 01, 02,..., 24) Cannot set to minutes.
If open-window mode and weekly timer program are on simultaneously, if the appliance turn off in weekly time, the appliance is not turned on. If it already turn on in weekly timer, the appliance working as the setting temperature under open-window mode. For example: when window open detection function is on, the weekly working time already setting before: it's Monday morning A.M 9:00--10:00, desired temperature 28 degree, the window open model means is only working A.
CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the heater. Warning: In order to avoid overheating, do not cover the heater. WARNING - Fabric, clothing or other flammable materials may ignite if placed against or in close proximity to the heater. No flammable materials should be placed within 120cm of the front or heat outlet and 50cm of sides or rear of the heater. Do not cover the heater. This appliance is for indoor use only.
