Instruction Manual Wi-Fi Smart Convention Heater Model: HCH2000WF BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS.
IMPORTANT Read and follow the instructions in this user manual even if you feel you are familiar with the product and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
• • • • • • • • • • • • • • • • • Connect to a grounded socket only. Do not place the heater directly under a wall socket. Do not use the product on a mobile socket. Do not immerse the product in water. Do not subject the product to water jets. Do not obstruct or cover the product’s air inlet or outlet grid. Do not insert any objects into the product. Do not use solvents to clean the product. Only plug the cable into a wall outlet. Do not use extension cords. Keep the power cable away from the outlet grid.
FOOT ASSEMBLY • • The product must be installed so that airflow is not obstructed. Carefully turn the unit upside down. Use the screws to fix the feet onto the heater. Take care to ensure that they are located correctly at the bottom ends of the heater side molding. • • • Be sure to place the convection heater on a flat surface. This panel convector heater is suitable for free-standing on supplied legs/feet.
OPERATION Insert the plug into a suitable socket outlet on an A.C. power supply having the same voltage as that shown on its rating label. The touch screen buttons located on the product correspond to the remote-control functions: 1. Fan 2. Temperature“+” button 3. Temperature“-“ button 4. Power button 5. Mode & WIFI reset button 6. Timer button 7. °F / °C switchover button 8. WiFi indicator light 9. Frost prevention light CONNECTION BY WIFI A free app is available for downloading for iOS and Android. 1.
4. Ensure the heater is located within WiFi range and switch on via power button. The indicator light “ ” will rapidly blink. If the indicator light does no rapidly blink, please press “ ” button for 5 seconds until you hear “beep” sound, then go to the App, tap “add device” at the bottom, as shown in Image 1, Press “+”in the top right corner, as shown in Image 1. Choose “All Devices” as shown in Image 2. Choose “Heater”, as shown in Image 3.
Image 3 Image 4 Image 5 Image 5 Image 6
OPERATION BY WiFi By connecting your heaters with the iOS/Android device you can do the following: • Control all your heaters situated in multiple locations. Everything is controlled with the GAFSmartLife App. • Set individual temperatures. Image 7 and 8. • The app will automatically increase the temperature in your house before you get back home manually, so that the heaters keep an even temperature throughout the whole day and night. Image 9 and 10.
MAINTENANCE • • • • • • Before cleaning the heater, wait until it cools down completely and unplug. Do not use abrasives and solvents. Wipe the product with a soft, wet cloth. It is necessary to remove dust from the surface regularly. DO NOT wash the heater or immerse in water. If you are not going to use heater for long periods of time, wipe the surface and store away in box. It should be stored in dry ventilated room. Avoid high humidity.
