Download

REMOTE CONTROLLER

INSPECTION ITEMS AFTER INSTALLATION

Items to be checked

Situation caused by improperly installation

Is installation stable?

The equipment may fall off or shake.

Is heat insulation adequate?

Damage objects close to equipment.

Does power voltage same as voltage shown on product rating label?

Equipment failure.

Does wire connection correct?

Equipment failure.

Does electricity earth cable connect safely?

There is electricity leakage risk.

Does wiring conform to standard?

Equipment failure or circuit damage.

PRECAUTIONS ITEMS BEFORE INSTALLATION

1.Do not turn on power before finishing all installation works.

2.Check all connections are correct and are firmly in place.

3.All backing materials must be removed from radiant heater body before installation.

4.Always operate the product from a power source of the same voltage, frequency and rating as

indicated on the product identification plate.

MAINTENANCE

The Heller strip heater is made from durable materials, however regular care and maintenance of your

heater will help prolong the life of the heater. Please see instructions below:

• It is recommended that you clean the heater with a soft cloth gently wipe the surfaces of the

heater with a mild detergent to remove any built-up contaminants from the environment.

• All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface

of the heater. In this case, additional cleaning and maintenance may be required. The cleaning

process at least every three months will reduce the amount of build up and keep it looking as

best it can. If the heater is in a corrosive environment e.g. salt spray, were commend that you

clean your heater with a light spray of fresh water every week. After cleaning, turn the heater on

for 20 minutes to dry any water residue and prevent water staining

• Before cleaning or inspection activity, the heater must be switched off and cooled down

completely.

• Do not use any abrasive materials or products to clean the heater, this includes solvents, citrus

Model NO.

POWER(W)

P1(W)

P2(W)

P3(W)

TIME(H)

APH2400R

2400

800

1600

2400