Instruction Manual 2000W Ceramic Wall Heater with LED Display Model: CWH521NS READ AND SAVE THESE INSTRUCTIONS
Read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.
• • • • • • • • • • • • • • • • • • Do not use near or point the heater towards furniture, animals, curtains or other flammable objects. Keep combustible materials such as furniture, bedding and curtains etc at least 1 metre from the front, sides and rear of the heater. Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord so that it cannot be tripped over.
Features Top cover Timer button Control panel Air outlet Power On/Off button Power ‘On’ indicator light Decrease temperature button Increase temperature button Timer button Mode button On/Off button Operating Instructions 1. Once you have successfully installed the Heater, insert the plug into a suitable power outlet and turn the power supply on. 2. Turn the heater ‘On’ by pressing the button on the control panel.
TIMER FUNCTION: The timer function can be used in any mode. The timer allows you to set the length of time from 0-8 hours. To use the timer, press the timer button on the control panel. Each press of the button increases the timer by one hour, for example pressing the timer button three times, will set the timer for 3 hours. The amount of time set will be displayed on the unit. OVERHEAT PROTECTION: This heater is fitted with a safety overheat protection device.
Cleaning & Maintenance 1. 2. 3. 4. 5. Wait for the machine to completely cool down before commencing and cleaning. Always disconnect the appliance from the main power outlet before cleaning. Clean the outside surface of the heater with a damp lint free cloth. Never immerse directly in water! Do not use any detergents/solvents or harsh chemical agents/abrasives to clean the heater Ensure the unit is completely dry and nothing is blocking the air inlet/outlet before powering on.
