Operation Manual

Setting up the antenna
HELLASSAT Point&Play Setup Manual - page 33 Version 1.2 - May 2008
Setting up the Point&Play™ Tool
To set up the Point&Play™ Tool:
1 Remove the TX connector from the iLNB and connect it to the Point&Play™ Tool.
2 Connect the headphone to the appropriate port of the Point&Play™ Tool.
3 Make sure the Point&Play™ Tool is turned on and the volume is high enough.
Rx Tx
RESET
DC 15V
LAN
iLNB
TX
iLNB
RX