How to Guide

Step 5: You may need to rotate the handle to adjust the TV to your

desired viewing angle.

Note: Pay extra care and attention when you fasten TV mounts to

the back panel of the TV in Step 3. Make sure the appropriate mount

hardware is being used properly.

1. Select correct mounting hardware according to the screw hole size of

your TV. Discard any remaining screws or spacers.

2. Carefully lay your TV on its face on a non-abrasive surface. Lay

padding underneath the TV so as not to damage the screen.

3. Place left TV mount and right TV mount in the appropriate position

making sure they are centered on the back of the TV and are level

with one another.

Step 5：

You may need rotate the handle to adjust TV to your desired angle.

PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TV MOUNTS

TO THE BACK PANEL OF TV IN STEP 2 . MAKE SURE THE APPROPRIATE

MOUNT HARDWARE IS BEING USED PROPERLY .

1. Select correct Mounting Hardware according to the screw hole size of your TV,

discard any remaining screws or spacers.

2. Carefully lay your TV on its face on a non-abrasivesurface, making sure to lay

padding underneath it so as not to damage the screen .

3. Place left TV mount and right mount in the approriate position, making sure

CENTERED on the back of the TV and LEVEL with on another .

±5°

Handle

Figure 6