HLNA07671 Helion Conquest 10MT XLR Manual

20
Turn OFF ESC and
Transmitter
Press and hold the
SET button then
Turn ON the ESC
RED LED ashes
indicating you are in
program mode
GREEN LED ahes
1 time to set Item 1
Program Item 1:
Running Mode
RED LED ashes to indicate
set value: 1-2, press button to
cycle through available values
GREEN LED ahes
2 times to set Item 2
Program Item 2:
Drag Brake Force
Program Item 3:
LVC Threshold
Program Item N:
“Programmable
Item”
RED LED ashes to indicate
set value 1-8, press button to
cycle through available values
RED LED ashes to indicate
set value 1-6, press button to
cycle through available values
RED LED ashes to indicate
set value 1-X, press button to
cycle through available values
GREEN LED ahes
3 times to set Item 3
Continue to cycle through available Programmable Items and set values as desired. We
recommend you start with the default values and adjust only one value at a time to be sure
the change has made the desired effect.
GREEN LED ahes
“N” times to set
Item N
HOLD SET BUTTON
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
HOLD SET BUTTON (3 Seconds)
Turn OFF ESC at any time to conrm setting, turn ON
again to begin using the new settings.
Programmable Items
(Blinks of GREEN LED)
Programmable Value (Blinks of RED LED), Black background indicates default settings
1 2 3 4 5 6 7 8
1. Running Mode
Forward
with Brake
Forward/
Reverse
with Brake
2. Drag Brake Force 0% 5% 10% 15% 20% 25% 30% 40%
3.
Low Voltage Cut-Off
Threshold
No
Protection
2.6V/
Cell
2.8V/
Cell
3.0V/
Cell
3.2V/
Cell
3.4V/
Cell
4.
Start Mode/Punch: Higher
value is more aggressive
Level 1
(70%)
Level 2
(80%)
Level 3
(90%)
Level 4
(100%)
5. Maximum Brake Force 25% 50% 75% 100%