HLNA0743 Animus 18DT Desert Truck Quick Start Guide

BINDING/PAIRING GUIDE
Full manual available to download from: www.Helion-RC.comFull manual available to download from: www.Helion-RC.com
6
Now switch the transmitter back
ON, followed by the car. You
should now have normal operation
of throttle and steering. Return to
Step 13 of this guide to complete
the set-up of your Animus Vehicle.
5
The green LED on the transmitter
will ash slowly whilst the red
LED on the receiver will change to
ashing slowly, then turn off, then
back on again. Switch the car OFF,
followed by the transmitter.
4
Press and hold the Bind button on
the transmitter, move the switch
to the ON position, then release
the Bind button.
000634-001 (REV A)
NOTE: If you experience any problems,
please consult online troubleshooting guide.