HLNA0743 Animus 18DT Desert Truck Quick Start Guide

QUICK-START GUIDE
Full manual available to download from: www.Helion-RC.comFull manual available to download from: www.Helion-RC.com
5
Slide the receiver aerial into the
antenna tube then rmly push the
tube into the mount that’s built
into the receiver module. Use the
1.5mm Allen key to tighten the
retaining grub screw and secure
the antenna tube.
6
Re-insert the fully charged battery
pack into the cradle and secure it
with the retainer and body clips.
Be sure to install the clips into
the lowest possible holes of the
battery mounting posts for the
tightest t.
7
Remove the transmitter battery
cover and insert eight AA alkaline
cells.
8
Ensure the radio switch is in the
OFF position, then connect the
battery to the ESC.
9
Connect the lights using the
servo-style connector on the HCT
adapter. Ensure the headlight
wires are stowed clear of any
moving parts and lower the body
over the mounts.
HCT Adapter
Lighting
Plug