User Manual

1/18th SCALE 4x4
ELECTRIC MONSTER TRUCK
...MAINTENANCE CONTINUED...
#
9
3. Shocks: Periodically inspect the shocks for smooth/free moon, leaking oil and dirt residue build up
around the sha
a. Do not allow dirt to build up around the shock sha and boom of the shock. Doing so will reduce
the life of the shock and cause a shock to leak oil. Be sure to clean the shocks regularly with a
clean and dry so bristle brush and/or rag
b. Signs to look out for determining if your shock needs to be maintained or rebuilt
i. Oil around the sha means the oil leaked from inside and needs to be replaced
ii. Persistent oil around the shock sha or lower poron of the shock typically points to
damaged O-rings which will need replacing. See your local hobby dealer for replacements
iii. Relling your shocks:
01). Remove shock from vehicle, remove spring and top cap
02). With shock sha extended, add oil to top of body (use only 100% silicone oil)
03). Slowly compress the shock sha 50% of travel using a towel or paper napkin to clean
up overowed oil
04). Slowly reinstall the shock cap and check for free moon of shock
05). It is normal for the shock to rebound (with the spring removed) aer full compression
and release
iv. Replacing the O-rings:
01). Disassemble shock and remove sha from the body
02). Carefully remove lower cap by prying with a nger nail or similar object
03). Remove the O-rings and replace with genuine replacement parts
04). Re-assemble the shock following the Relling instrucons above
4. Tires and wheels:
a. Inspect the res to ensure they are properly glued to the wheels. The res on your vehicle come
pre-glued from the factory; however aer running your vehicle it is possible for the glue to come
loose in some areas.
i. To reaach the re to the wheel, use hobby grade Cyanoacrylate (CA) glue and apply small
amounts (one drop at a me) between the re and wheel. Allow the glue to fully dry before
operang your vehicle
Cauon: Be sure to use extreme care when using hobby-grade CA glue. It is specially formulated to
cure quickly and create a strong bond. It will bond skin and can cause injury if used improperly. Follow
manufacturer’s warnings and direcons when using CA glue. It is always recommended to wear eye
protecon when maintaining your vehicle.
ii. When reinstalling res, use cauon when ghtening the nuts that secure the wheels to
the vehicle. Ensure they rotate freely but don’t wobble excessively. Over ghtening the
wheels will cause excess strain on the electrical and mechanical components of your vehicle.
Operang your vehicle under these condions will void your warranty
iii. Tire wear: Consequently running your vehicle will cause the res to eventually wear out. Be
sure to obtain and use genuine replacement parts from your local hobby dealer
5. General wear and tear:
a. Use of your vehicle will cause general wear and tear which is not covered under warranty yet may
necessitate replacement of components. Connued operaon of your product with use of worn
components may cause connued damage to other components
b. Be sure to regularly inspect your vehicle and accessories for excess wear and damaged
components