User Manual

1/18th SCALE 4x4

ELECTRIC MONSTER TRUCK

SAFETY TIPS...

ADJUSTMENTS AND TUNING CONTINUED...

Although great for rst me users, Helion RC products are indeed advanced radio controlled vehicles with

sensive electronics and moving parts capable of causing injury if used improperly. Always use cauon and

common sense as failure to operate your Helion RC product in a safe and responsible manner can result in

damage to the product or other properes. Therefore this product is not intended for use or maintenance

by children without direct adult supervision. Helion RC and your hobby dealer shall not be liable for any loss

or damages, whether direct, indirect, special, incidental, or consequenal, arising from the use, misuse, or

abuse of this product or any product required to operate or maintain it

• For your safety, do not operate your vehicle in rain, electrical, or thunder storms

• The vehicle should never be turned ON without the transmier being turned ON

• Never operate your vehicle when with low transmier baeries

› Indicated by ashing LED on the transmier

• Always check for proper radio system operaon (steering and throle) prior to leng go of the vehicle.

If the vehicle does not respond properly to transmier input, turn the vehicle OFF and inspect all

connecons and operang environment. Also see the Troubleshoong guide in this manual

• Operate in a dry (no puddles), open environment away from trac, and cars (never run into the street

for any reason)

• Always turn o both transmier and ESC and disconnect the baery from the ESC aer use

• Exercise extreme cauon when touching the motor immediately aer running your vehicle, it may be

HOT and may cause a burn

• Always allow the motor in your vehicle to cool before using again

NOTE: Only use genuine replacement or aermarket parts available from your local hobby dealer to

ensure proper operaon of your Helion RC product.

Baery posion: It is possible to run your Animus 18MT with the baery either in a forward or rear posion.

• The baery is located in the rear posion from the factory. This is ideal for opmum tracon and stability.

• If you desire more responsive steering and less stability, moving the baery to the forward posion will

provide this feeling

Body Mount Height: The body mounts on the Animus 18MT are capable of vercal adjustment with 4 height

opons available

• The default seng allows for the lowest body posion while maintaining component clearance

• Adjust the body mounts to achieve a desired look