User Manual

1/18th SCALE 4x4

ELECTRIC MONSTER TRUCK

STORAGE AND DISPOSAL...

Before contacng customer support, recall that this is a hobby grade product intended to be

user serviceable. Please take the me to fully inspect your product for any obvious causes to

the issues you are experiencing. Below are some of the most common issues experienced. Scan

the QR code to the right with your smart phone for quick access to the product support page

on our website.

1. Dead transmier or vehicle baeries will cause the product to malfuncon and not work properly. As

with TV remote controls in your home, if the baeries are dead, they don’t work. Start power related

troubleshoong with fresh baeries in the transmier & recharged baeries in the vehicle.

2. Connecons between the Baery, ESC, and Motor are crical to the performance of the product.

Running in various debris may cause foreign objects to snag on wires, causing connecons to come

loose. It is a good idea to unplug and reconnect motor and baery connecons when beginning

troubleshoong.

3. Drivetrain issues can mask themselves as power related. Inspect the wheels, driveshas, and motor for

foreign objects that may have become tangled or wrapped around the spinning parts of the drivetrain.

Small objects like shing line for example, can wrap around a drive sha, overheat and melt due to the

fricon and cause the enre drivetrain to lock up. Although a big problem, it can be dicult to see when

inspecng. Always remove the wheels from your vehicle when starng drivetrain related issues.

4. When running in dirt and areas with a lot of debris, the motor can be exposed to foreign contaminants

such as grass, twigs, or other objects which can get lodged in the cooling holes of the motor, causing the

motor to lock up and stop funconing. Inspect the holes of your motor for foreign objects and remove

them if present.

5. Healthy gears are crucial to a properly funconing vehicle. If you hear your vehicle making very loud

noises, you should immediately stop and check the gears for foreign debris. Even a small pebble can get

lodged into the teeth of the pinion gear, which would praccally destroy the spur gear quickly.

Storage:

• Always store all equipment in a cool dry place when not in use

• Always disconnect the baeries before storage

• Never store the baery, vehicle or transmier in direct sunlight for extended periods of me

• Never store the transmier with baeries installed for extended periods of me. Doing so may allow the

baeries to leak and cause permanent damage to the transmier

Disposal:

Your product is equipped with NiMH baeries which are considered electronic waste and should never be

discarded in standard garbage containers. Please visit your local hobby dealer and use the FREE baery

disposal center for proper disposal/recycling