User guide

22
NOVUS CP – REPLACING A MOTOR
Unplug the motor from
the E-Board and remove
the motor mounting
screws. Remove the old
motor and install the new
motor. Reinstall the motor
mounting screws and plug
the motor connector back
into the E-Board.
NOVUS CP – E-BOARD CONNECTIONS
Function DefaultSwitch
Elevator Reversing Switch Off1
Aileron Reversing Switch Off2
Throttle Reversing Switch Off3
Rudder Reversing Switch On4
Pitch Reversing Switch On6
Revolution Mixing Reversing Switch On8
CCPM Mixing / Normal Mixing On9
Pitch Curve Adjustment Off11
Gear Reversing Switch Off5
Gyro Gain and Revolution Mixing Off12
Throttle Position and Servo Exponential Adjustment Off10
CCPM Elevator Reversing Switch Off7
Transmitter Settings
WARNING!!
The Heli-Max Novus CP has
been factory-set and test
flown. Do not make adjust-
ments to the transmitter
settings until you have flown
the model a few times.