Replacement Part List

SAVE THESE INSTRUCTIONS
For your safety, read, understand, and follow the information contained within. The owner and operator shall have an
understanding of this product and safe operating procedures before attempting to use this product. Instructions and
safety information shall be conveyed in the operator's native language before use of this product is authorized. Make
certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove
from service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or otherwise damaged parts (including lablels).
If the engine stand has been or suspected to have been subjected to a shock load (a load dropped suddenly and unex-
pectedly upon it), discontinue use until checked out by an authorized factory service center. Owners and operators of this
equipment shall be aware that the use of this equipment may require special training and knowledge. It is recommended
thatanannualinspectionbedonebyqualiedpersonnelandthatanymissingordamagedparts,decals,warning/safety
labels or signs be replaced with factory authorized replacement parts only. Any engine stand that appears to be damaged
in any way, is worn or operated abnormally shall be removed from service immediately. Labels and Operator's Manual
are available from manufacturer. (see Replacemen parts, page 6).
PRODUCT DESCRIPTION
Hein-Werner Engine Stand is designed to safely support rated capacity engines. Welded steel tube construction, heavy
gauge steel head plate and mounting arms along with compliance with factory standards ensure safety, strength and
stability.
DO NOT USE FOR ANY PURPOSE OTHER THAN THOSE USES OUTLINED ABOVE!
3
Wheel
Front Section
Caster
Rear Section
Operating Handle
Head Plate
Mounting Arm
Figure1:Hein-WernerEngineStandComponents
Rotation Lock Bolt (Not Shown)
Head Plate Collar
SPECIFICATIONS
HW93778-M0
Model Capacity Head Height Wheel Diameter Weight
HW93778 1250 lbs 31-3/4" 2-3/4" 65 lbs.