Specification

2
SPECIFICATIONS
Model Capacity per Pair Base Size Min. Height Max. Height Height Intervals
HW93526F 25 Ton 9-7/8" x 9-7/8” 12-3/8" 20-3/8" 2-1/8"
Figure 1. Heavy Duty Vehicle Stand Components
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety read, understand, and follow the information provided with and on this pair of
vehicle stands before using. The owner and operator of this equipment shall have an understanding of the jack stands
and safe operating procedures before attempting to use. The owner and operator shall be aware that use of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native
language before use of these jack stands is authorized. If any doubt exists as to the safety or proper use of these vehicle
stands, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any stand
that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately.
If you suspect that the jack stand was subjected to a shock load (a load dropped suddenly, unexpectedly upon it),
immediately discontinue use until the stand has been checked by a factory authorized service center (contact distributor
or manufacturer for list of Authorized Service Centers). It is recommended that an annual inspection be done by qualied
personnel. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
Hein-Werner Heavy Duty Vehicle Stands are designed to support rated capacity, partial vehicle loads consisting of one
end of a vehicle.
WARNING: Use vehicle stands as a matched pair to support one end of a vehicle only. Rated capacity is per
pair.
Saddle
Extension Tube
Height Adjustment
Holes
Support Pin
Base Section
Collar
Lanyard
!