Product Manual

5
!
Lowering
Be sure all tools and personnel are clear before lowering load. Maintain control of the rate of speed at
which the load lowers at all times!
1. Push the air valve lever towards air input to apply air pressure slowly with lock pin still engaged.
2. Ensure the vehicle is still stable and level before removing lock pin. Then, carefully remove the lock pin.
3. Push the air valve lever slowly towards air valve stem to exhaust air pressure, vehicle will gradually lower.
4. Discharge the air pressure from the jack fully once the vehicle is on the ground.
5. Remove the jack from under the vehicle and place it away from the work area.
6. Ensure the saddle is fully lowered and keep extension post in the extension post holder.
1/4" NPT Male Quick
Couplers (3 each)
1/4" NPT
Pipe Tee
(1 each)
1/4" NPT Female
Quick Coupler
(2 each)
1/4" NPT Pipe
Nipples 1-1/4"
Long (2 each)
Figure 2 - Illustration for assembling the connectors