HeimVision FHD Smart WiFi Camera Manufacture ：Shenzhen VanTop Technology & Innovation Co., Ltd Product ：1080P FHD SMART Wi-Fi Camera Model ：HM203 Dear users, you are welcome to choose this product.
1、Main Function Description system video audio record Embedded Processor GK7102 OS LINUX sensor 1/2.7" CMOS GC2033 Video coding Smart H264+ resolution 2.0MP/1080P frame 15fps lens 3.6MM/F2.3 view angle 110° digital zoom 4X Day and night IR_CUT filter IR LED 6pcs 850nm audio coding G.
PTZ alarm network interface environment Horizontal 355° Vertical 95° auto tracking support preset support motion detection support sound detection support siren alarm support notification phone、Email Wi-Fi 802.11b/g/n 2.4G protocol TCP/IP、HTTP、DHCP、Amazon cloud、P2P TF up to 128G reset support LAN RJ45 power Micro USB temperature 0℃－＋55℃ humidity 10%－90% size 12.7cm*9.85cm*20.
3、How To Operate The Mobile APP 3.1 Register an account When you use this app at the first time, you need to use your email to register an account, click “Sign Up” and set a password according this procedure. *If you forget your password, you can reset your password, just click "Forgot password” on the login page. *Password should be at least 6 characters and not longer than 30 characters. It should be a combination of letters and numbers.
Align the two-dimensional code displayed on the phone with the camera lens, maintain a distance of 4-8 inches and keep balance. Click “I heard the beep voice” after hearing the beep, a few seconds later, you will hear the voice “Internet connected welcome to use cloud camera”. 3.2.2 Addition by connecting to network cable (Only support Lan port device) Please connect Ethernet cable between camera and Wi-Fi router.
3.2.3 Addition of AP hotspot After your phone connect to a Wi-Fi , please click “Add device” and “Addition of AP hotspot”, reset the camera, after hearing the voice “Please configure camera by scanning code or AP hotspot”, please click the “Connect to the network”. Follow the wizard make your phone connect to “CLOUDCAM_XXXX” network and Return to YCC365 plus app. Click “Next ” and Select your own Wi-Fi and login with your password.
3.3 AP Direct mode (special) Power up the camera and hear the voice "Please configure camera by scanning code or AP hotspot" (if you don't hear the voice, reset the camera） Press the reset button for two seconds and hear the voice "Enter AP access mode after reboot" (The camera will no longer be voice broadcast after restarting). Make your phone connect to “CLOUDCAM_XXXX” network ” .
Open the YCC365 plus app to enter the login interface, click the setting icon in the upper right corner . Click “AP networked device preview” and Click “Next” . Scanning the device in the Wi-Fi network , then click the device . Enter user name: YCC365 password: 0123456, click “CONFIRM”, then you can preview the screen.
4 Function introduction Real-time preview interface A:Parameter Menu C:Full Screen E:pan-tilt reset G:Pan&Tilt I:Video quality L:Sound K:More B:Snapshot D:Video playback F:Preset H:Message J:Hold to talk Control white light View cloud albums Video to the phone. 4.1 PTZ/ Preset PTZ By sliding steering wheel or sliding the screen on the live preview can control the camera's rotation . Preset 1、Click the preset icon to enter the preset management interface. 2、Add the preset: several presets can be added.
4.1.
4.1.2 Delete the preset 4.2 Video playback Gentle hint : video playback by default is cloud recording , if you want to playback the video on the TF card , you can switch “play videos from” to “SD card”. Cloud video has color discrimination, dark blue indicates the alarm recording and light blue indicates non-alarm recording. TF card video color uniform light blue. Click the date icon to playback the video of the selected date.
4.3 Video clip Gentle hint: Only the cameras with cloud service package have this feature. Drag the playback cursor and click the clip icon, select start time and click “save to the cloud album ” , enter the video name and click “save”.
4.4 Download cloud video / share cloud video Click the cloud album icon and click the video clip, click “Download” to save the video to your phone or click “Share” to share your Video on Facebook and YouTube.
4.5 cloud video playback Click “Message” to view the alarm video.
5.1 Cloud Storage service We offer 30-day-long cloud service, everyone can enjoy the cloud storage service for free, after that you can choose to pay for the service with a low cost. A、Select “Cloud service” and check Subscription packages B、There are three kinds of subscription packages for you, you can choose to pay for this service by monthly or yearly. C、We support PayPal payment system, click “Go to PayPal now” and then finish the payment ( please install PayPal app in advance ) 5.
5.3 Notification settings Turn on the switch,detect sound abnormal sound triggering message push Turn on the motion switch,detect the motion triggering message push Set the frequency of message push Turn on the email notifications,detect motion or sound triggering send e-mail Gentle hint：Only the cameras with cloud service package support mail delivery.
5.4 Other functions settings HD video: switch the quality of pic， HD / SD Device Microphone: Open / Close the microphone Night Vision： 1、Off, close the night vision 2、On, always open night vision 3、Auto, automatic switchover Rotate The Video Feed 180°：Flip the picture when the camera is installed under the roof. Wi-Fi Network: Change the Wi-Fi on the device. Note: The Wi-Fi must be searchable, if the location changed and the Wi-Fi is different, please reset and connect to a new Wi-Fi again.
7 How to use a camera on a computer Log In 8、 Frequently asked questions 1、Can’t add the device？ A、Please make sure the camera has been reset. Press the Reset button until hear the prompt tone B、Only support 2.4GHZ Wi-Fi, if your Wi-Fi router is 5GHZ, please switch to 2.4/5GHZ dual mode. C、Please turn on the GPS service before adding the device on the Android mobile phone .
A、If you can’t go to the second step, please check your Wi-Fi channel is not hidden, and the Wi-Fi router can’t be so far from the camera. If this way doesn’t work, please scan the QR code to add the camera. B、If you can’t go to the third step, please reduce the number of the Wi-Fi users, and delete the special characters of your Wi-Fi password. C、If you can’t go to the forth step, please try again, if it still doesn’t work, please contact the seller.
Parameter setting >> Wi-Fi Network >> select the Wi-Fi B: When the camera is moved to another place, please start the camera, you will see the “Device disconnected” on the main page, and then click “TROUBLESHOOT” to connect to the Wi-Fi again. • After sales instruction 1、The product will be updated in real time, if there is update, it will not be noticed anymore, please visit our official website for reference.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
