User Guide
Factory resetMounting tips
All conguration parameters will be reset after the remote
is reset or removed from the network.
NOTE
Press and hold down both buttons (G + H) until the
LED indicator (F) turns on.
Immediately press the left button (G) 5 times continuously.
The indicator (F) will now ash 3 times quickly to indicate
successful reset.
F.
Press and
hold G. + H.
Press G.
5 times
continuously
Mounting with frames from
other brands
This product can be installed
in combination with other
installation products like
dimmers and thermostats.
The product ts in to
traditional combination
frames from various
manufacturers.