User Guide
Remove the battery insulator
Use tool to open
the silicone gel
battery cover
Pull out the
battery insulator
Install the
silicone battery
cover back
1.
Open the Heimgard app and follow the steps listed
here to connect to your device
Press and hold down both buttons (G + H) until the
LED indicator (F) turns on.
2.
3.
Manage
Devices
Immediately short press the left button (G) to start
pairing. The indicator (F) will now ash every second.
If the device isn’t discovered in 20 seconds, repeat the process.
The LED indicator (F) will blink 5 times quickly for successful pairing.
F.
Press and
hold G. + H.
Short press
G.
Your device will appear in the Found Devices list.
Click congure to add the device to a specic room.