Wireless Switch 2 buttons Quick start guide version 1.
Device overview What is in the box F. LED indicator C. Mounting bracket C. Mounting bracket B. Frame A. Wireless switch handle D. Battery CR 2450 E. Button labels G. Button 1 H.
1. 3. Remove the battery insulator Press and hold down both buttons (G + H) until the LED indicator (F) turns on. Immediately short press the left button (G) to start pairing. The indicator (F) will now flash every second. If the device isn’t discovered in 20 seconds, repeat the process. The LED indicator (F) will blink 5 times quickly for successful pairing. F. Press and hold G. + H. Use tool to open the silicone gel battery cover 2.
2. Wireless Switch Configuration 1. Add actions: You can add an action to a button by clicking Configure for each button group. Select a function for each button. How to identify each button 1. Press a button on the device you want to identify. Each button can be individually configured for device control, room control, scenes or alarm modes. Scan QR-code for more detailed instructions on how to configure the buttons. 2.
2. Mounting NOTE 1. No wiring required. Install the controller to wall (2 options) Option 1 Remove protective layer on the doublesided tape on the back of the wall mount and stick the bracket to the wall.
Mounting tips Factory reset Mounting with frames from other brands Press and hold down both buttons (G + H) until the LED indicator (F) turns on. This product can be installed in combination with other installation products like dimmers and thermostats. Immediately press the left button (G) 5 times continuously. The indicator (F) will now flash 3 times quickly to indicate successful reset. The product fits in to traditional combination frames from various manufacturers. F. Press and hold G. + H.
Technical specifications Protocol Zigbee 3.0 Operation voltage 3VDC (CR2450) Transmission frequency 2.4 GHz Transmission range (free field) 30m Protection type IP20 Dimming range 0.1% - 100% Dimensions 71.2 x 71.2 x 13.6mm • Zigbee switch based on Zigbee 3.0 • 2.
Need help? Important safety information 1. 2. Website: heimgard.com/support Email: support@heimgard.com 4. 5. Facebook: facebook.com/heimgardnorge/ 6. 7. Telephone: +47 649 44 422 3. 8. 9. 10. Visit heimgard.com for more information and tips on how to use. 11. 12. Read through these instructions and follow accordingly. Clean only with dry soft cloth. Household cleaners and solvents can damage the finish on your device.
heimgard.
