User Guide

Factory Reset
If your dimmer has previously been connected to
a dierent Hub, you may need to perform a factory
reset.
Quickly press the reset button (B) 5 times
continuously.
If you do not have access to the reset
button, turn the power supply on and o
5 times. This could be done either from
the circuit breaker in the fuse box or from
the connected wired wall switch.
Press 5 times
1.
2.
The device that is connected to this
dimmer will turn on/o 3 times to
indicate successful reset.
You will have to recongure your
device.
Note: make sure your connected
device is functioning properly.