User Guide

Connecting to the Hub
These steps are to be followed after the dimmer
has been properly installed and wired by a certied
electrician.
1.
At the circuit breaker, turn o the power
to the dimmer.
Open the Heimgard app and follow
the steps listed here to connect to your
device
2.
Manage
Devices
3.
Turn the circuit breaker power on to
power up your dimmer.
It will automatically enter pairing mode.
The connected light will ash 2 times to
indicate powering on.
4.
When the connected light ashes 5
times and then remains on, the device
has been found in your app.
5.
You will now see the In-wall dimmer in
your new devices. Congure the dimmer
by giving it a name and adding it to a
room.
Your light is now able to be controlled by
your app.