User Guide

Installation and wiringConnection diagram overview
This device should be installed by a licensed
electrician in a manner that conforms to local
regulations and building codes.
WARNING: Electrical power must be switched o
during installation
Electronical properties
• Load (A) 1.8 Max
• Voltage (V) 100-240
• Voltage type AC
• Power source AC
FIRST ENSURE THE POWER IS OFF at the main
circuit breaker, and then test the wires with a probe
or multimeter to verify.
Connect the input power and output wires to the
correct device terminals. Follow the connection
diagram and instructions on the next page.
Live lead input
Neutral lead output
Live lead output Neutral lead input
Switch
input
Notes for the diagrams:
L in - Live lead input terminal
N in - Neutral lead input terminal
L out - Live lead output terminal
N out - Neutral lead output terminal
S1 - External switch terminal
COM - Terminal for grounding to the
switch connected to the dimmer