User Manual

2
Functional description
1.ON/OFF Button:
Turning on the units:Press the
button to turning on the units.
Note: The initial default operation mode is AUTO and then will display the mode before turning off
Press
button again to turn off the unit.
2. temperature +/- Button:
(1)This button is invalid in FAN mode;
(2)Press
button once, temperature will increase or decrease by 0.5°C; pressing and holding the
button will make the temperature change quickly.
3. FAN SPEED Button:
Press the
button, the cycle sequence is as follows:
Low LowMedium High Auto
4. QUIET
Press
button, the controller screen will display " " . The fan speed in Quiet function is
automatic fan speed, but the specific fan speed grade in auto depends on indoor unit.
Note: This function is valid under the mode of COOL and HEAT.
5. COOL/ HEAT
Press
button and button to execute COOL mode and HEAT mode .
6. MODE
Press the button every time, the cycle sequence is as follows: → → → →
→