User guide

page 28 of 61
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999248 / 28/04/2011
Temporary switching from ”Pump down” to ”Vac control” or ”Auto mode” (only if control is run-
ning):
☞ Presskey”MODE”.Thecontrollerswitchestofunction”Vaccontrol”,thecurrentvacuumisusedas
set value.
☞ Pressingkey”MODE”againswitchestofunction”Automode”.Thecontrolleradaptstheboilingpres-
sure starting from the current vacuum.
☞ The preset function of the controller does not change due to this temporary switching. When pressing
key”STOP”thecontrollerissetagaintothefunction”Pumpdown”.
Adapting the pumping speed during pump down:
☞Presstheselectionknobandturn.
☞Turningtheknobtotheleftreducesthespeed.
☞Turningtheknobtotherightincreasesthespeed.