Manual

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 01-005-005-36-1
page 24 of 35Translation of the original instructions
➨ Remove catchpots at inlet and outlet.
➨
Removethe4screwsafxingtheheadcovercowlingwith
a Torx driver T20. Pay attention to the washers under the
screws and remove.
➨ Pull off head cover cowling carefully. Do not tilt.
Detach the coupling of the connection tube to the other side
of the pump as well as the hose connection to the inlet/outlet
of the vacuum system at the valve head.
➨ Openthehoseclipwithaslottedscrewdriver.
➨ Pull the tubing off the hose connector.
Openingthehoseclip:
➨ Apply slotted screwdriver as shown and turn.