Owner manual

Set-up and Start-up Set-up and Start-up

56 57

1 Heating bath unit plug

Heating bath connecting line

(symbolically without a cable and

connector)

3 Power supply connector

Figure 4-3: Connections

1 2 3

Figure 4-4: Heating bath connector

1 Unit plug

2 Connector

3 Cap nut

1. Plug the socket of the heating bath connecting cable (2) of the Hei-VAP base into the

appropriate connector (1).

2. Plug the socket (2) with the cap nut (3) of the heating bath connecting cable (7-pin)

into the heating bath:

- Press the socket into the connector so that the locking stub ts into the groove.

- Grab the socket (2) on the cap nut (3) and turn the knurled nut clockwise to

x it.

3. Plug the power supply cable into the power supply plug on the back panel of the base

unit.

4. Connect the power cable to the power supply.