User Manual

Installation Installation
56 57
Screw cap GL32 (optional)
If you wish to use the Hei-VAP with condenser G9 without the Distimatic, then secure
the screw cap instead of the multiple screw connection to connection (8) and tighten
until hand-tight.
Remove the evaporating ask from connection (9), ll medium into the evaporating
ask and then secure the evaporating ask into place again.
Connect vacuum tubes to connections (10), (11) and (12).
Connect vacuum tube to connection (13).
8
10
12
13
11
9
Hose connector
T-type, 3/2 way valve and vacuum tube connections
Connection principle of the vacuum circuit
See chapter entitled „Function and connection principle” -
Hei-VAP Distimatic”-„Connection principle of the vacuum circuit”.