Manual
7
BARREL CLEANING
• Unload the gun before cleaning the gun.
• Do not force the rod into the barrel, as this could cause damage.
• Occasionally clean the metal parts on the outside. Use a cloth which has been slightly damp-
ened with some gun oil.
• Never drip silicone oil directly into the barrel.
Put the safety on “safe”. Prepare a thin rod with a length of approx. 30 cm. Attach a piece of cotton
fabric to its end and clean the barrel with some silicone oil.
CAUTION
1.
2.
3.
4.
3 cm
1 cm
Piece of cotton
POSSIBLE CAUSES
Safety activated
Gas / magazine empty
Dirty barrel
Extreme temperatures
Wrong ammunition
Ammunition badly loaded
Sight not properly
adjusted
PROBLEMS
Faulty shooting direction
Gun does not shoot
Low shooting speed
PROBLEM SOLUTIONS
Pull trigger
1.
2.
Adjust the
fire selector
Note:
After the last BB has been fired, the
bolt will remain in its rearmost position.
Push up the bolt catch to bring it back
to the closed position.
CAUTION
Please do not switch the fire selector while pulling the trigger. This causes severe damage to
your gun.
SHOOTING