Manual

5
INLAYING RECHARGEABLE BATTERY
CAUTION
• When batteries are almost empty they can cause gearbox malfunctions that require repair.
• Batteries should never be overdischarged. This can damage the cell.
• Prolonged overcharging causes permanent damage to batteries.
• The battery should always be drained before charging.
• There is no warranty for batteries, because they are wear parts. Use only those batteries
of 9,6 V (Crane Stock e.g. Article-No.: 2.6003) / 8,4 V. (PEQ 15 e.g. Article-No.: 2.6002).
Please note that flat batteries must not be put in the household waste. Dispose of them
properly, hand them in at your local shop for disposal or take them to a used battery
collection location.
2.5954 / 2.5954X
Open the cap. Current line & battery mounted
how pictured
Loosen screws
Close the cap
6.
Current line & battery
mounted how pictured
3.
1.
Remove stockcover
2.
4.
5.
Connect the plug Slide on the stockcover
CAUTION!
Avoid crushing of the cables.
CAUTION!
Avoid crushing of the cables
2 mm
1.
Install the battery box on the picatinny rail, then
connect the connectors
2 mm
5. 6.
3. 4.
2.
2.5647 / 2.5647X / 2.5648 / 2.5648X / 2.5948 / 2.5948X / 2.5986 / 2.5986X / 2.5896 /
2.5896X / 2-5897 / 2.5897X