Installation & Assembly

INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE

To reduce the risk of drowning, electrocution, falls, or other serious injury or death:

• Check building codes/permits.

• Consult local Building Department before installation of step and equipment.

• Equipment installation must comply with the codes of the authority having jurisdiction

and may require permits (e.g., building, plumbing, electrical, zoning, etc.).

• Be sure that barriers (fences, gates, etc.) restricting spa access meet local codes.

• Use for intended purpose only.

• Not intended for storing hazardous products (e.g., chemicals).

• The step is not a secure location.

• Ensure that all required parts are included by checking the contents of the carton against the

Parts List. All parts and hardware are required.

• If any parts are missing, DO NOT attempt to assemble or install the step. Instead call our

Consumer Hotline at 1-800-759-0977 for assistance.

• Select an appropriate location for the step. The step must be located on a level, solid base

and in a location that will be in full view of competent adult supervision when in use.

• For correct assembly and installation, all instructions must be followed completely and in the

sequence shown.

• Follow the manufacturer’s recommendations for the safe use of all hand tools and equipment

used during installation.

• Only use a cordless drill for assembly and installation. To reduce the risk of electrocution,

NEVER use a corded drill in or around water.

• Lift safely. When lifting awkward or heavy loads, have another person help.

• Double-check assembly after installation and before using the product. Go over the

instructions and procedures again to make sure nothing has been overlooked.

SAFE INSTALLATION

INSTALLATION SÉCURISÉE

WARNING