Instruction Manual

Model: Touch Carbon

Optional Settings - Feature Table

Optional Settings Explained

Programming Mode: The following program modes are available;

5/2 Day Programming - 4 On/Oﬀ switching times for the weekdays and

4 On/Oﬀ switching times for the weekend.

7 Day Programming - 4 individual On/Oﬀ switching times for each day.

24 Hours- 4 On/Oﬀ switching times over a 24 hour period.

Daylight Saving Time (DST): is where the thermostat sets the clocks forward one

hour from Standard Time during the summer months, and back again in autumn, in

order to make better use of natural daylight.

Communications ID To interface with building management systems using the

standard Modbus protocol.

Back-light Dimming: When no interaction is present the LCD brightness will lower.

Dimming level can be changed between 'Medium' or 'Low' to suit the environment.

FEATURE SETTING

Program Mode 00 = 5/2 (Default),

01 = 7 Day,

02 = 24 Hour

Daylight Saving Time (DST) 00 = Disabled (Default) 01 = Enabled

Communications ID 01-32 (00 = Disabled)

Back-light Dimming

00 = Medium 01 = Low

03 = Countdown

Countdown Timer - will activate the output during the countdown period.