Instruction Manual

39
Setting the Switching Times
.
Touch Series
To program the ’Switching times’, press the ‘EDIT’ key ..........................................................
• Use the ‘DAY’ key to select day/period of week (the selection will flash) ............
• Press ‘NEXT’ to confirm selection ........................................................................................
‘WAKE’ will now flash and the ON time will be displayed.
• Use the ‘Up/Down’ key at the top to set the ‘Hours’ & ‘Minutes’................................
• Press Next.....................................................................................................................................
The OFF time will now be displayed.
• Use the ‘Up/Down’ key at the top to set the ‘Hours’ & ‘Minutes’................................
• Press the right arrow key.............................................................................................................
‘LEAVE’ will now flash and the ON time will be displayed.
Repeat the steps above to set all switching time levels.
For any unused periods set time to --:--
• Press ‘DONE’ to confirm and save the settings ..............................................................