Instruction Manual

24
Model: Touch Carbon
Locking the Display
Unlocking the Display
The Touch Carbon has a keypad lock facility. To activate the lock follow these steps.
• Press and hold the ‘HOLD’ key for 3 seconds..........................................................
The display will show 0000. At this point enter a four digit pin number.
• Use the ‘Up/Down’ keys to set the first two digits ...............................................
• Press ‘NEXT’ ........................................................................................................................
• Use the ‘Up/Down’ keys to set the next two digits ..............................................
• Press ‘DONE’ .......................................................................................................................
The display will return to the main screen and display the keypad lock indicator.
Note: The keypad lock indicator is only displayed when the lock is active.
• To unlock the Thermostat press any key once. The display will show 0000.
At this point enter the four digit pin number you set previously.
• Use the ‘Up/Down’ keys to set the first two digits ...............................................
• Press ‘NEXT’ ........................................................................................................................
• Use the ‘Up/Down’ keys to set the next two digits ..............................................
• Press ‘DONE’ .......................................................................................................................
The display will unlock and return to the main screen.