Instruction Manual

15
Number of accessories
connected.
Pair/Reset
button
Pair/Reset
button
LED Indicator
Countdown time
Window/Door Wireless Contact Sensor Wireless Air Sensor
Touch Series
The thermostat will now start a 99 second countdown. During this time multiple
sensors can be added.
• On the ‘Air Sensor & Window/Door Contact’, press and hold the pairing
button for 5 seconds. The LED will glow red to indicate pairing status.
If the sensor has successfully paired, the LED will go out after a few seconds. The
thermostat display will then show ‘01:P’ to indicate that the first accessory has
joined. If countdown time elapses before all accessories have been paired,
restart the countdown to add further sensors following the previous steps.