Instructions / Assembly

10
Guard Bracket
ASSEMBLY INSTRUCTIONS
13
Step 11
Place the glass tube (#10) by guiding it up to insert the upper end through the center hole in the upper plate.
Do not force the tube. Slide the bottom end into place and settle it into the hole in the glass tube base.
Ensure that the Glass Tube is positioned properly to cover the spiral.
Step 12
Attach (4) meshes (#3) to the upper supports with (4) M5 x 12 screws (CC) and (4) guard brackets (EE)
as illustrated.
Hardware Used
M5 x 12 Screw
4 pcs
CC
4 pcsEE
CC
EE