30" Gas Fire Pit Model #: SRGF11626 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-909-3888, 7:00 AM 4:00 PM PST, Monday Friday, or e-mail to customerservice@shinerich.us.
WARNINGS AND CAUTIONS Read the instructions before use. This appliance must be installed in accordance with such regulations as are enforced. DANGER FIRE OR EXPLOSION HAZARD If you smell gas: ● Shut off gas to the appliance. ● Extinguish any open flame. ● If odor continues, leave the area immediately. ● After leaving the area, call your gas supplier or fire department. Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.
TABLE OF CONTENTS Warnings and Cautions...................................................................2, 4-5 Table of Contents...................................................................................3 Tools and Parts...................................................................................6-7 Assembly Instructions.......................................................................8-15 Installation Instructions ......................................................................
WARNINGS AND CAUTIONS IMPORTANT SAFETY INFORMATION s The installation must conform with local codes or, in the absence of local codes, with either the Natural Gas and Propane Installation Code, CSA B149.1, or the Propane Storage and Handling Code, CSA B 149.2. s This appliance requires 20 lb (9 kg) LP gas supply cylinder. s The burner must be replaced prior to the appliance being put into operation if it is evident that the burner is damaged.
WARNINGS AND CAUTIONS NOTE: PLEASE READ THE FOLLOWING SAFETY RULES: Perform a leak test with a soapy solution: 1. To check gas connections. 2. After connecting a new cylinder. 3. Upon re-assembly after disassembly. This appliance is designed to operate with a standard 20 Ib propane cylinder with Approved Cylinder Connection.
PACKAGE CONTENTS TOOLS NEEDED: (NOT INCLUDED) Philips screwdriver Estimated time for assembly: 30-45 minutes.
PACKAGE CONTENTS PART A B C D E F I DESCRIPTION QUANTITY Table Top Frame 1 3 Side Panel 1 Control Panel Assembly 3 Leg Leg With Door Magnet 1 Cylinder Holder Pole 2 Door 1 PART J K L M N P Q DESCRIPTION Door Handle Cylinder Holder Cylinder Locking Bolt Cover Lid Glass Chips Cushion Pad Ceramic Tile 1 QUANTITY 1 1 1 1 1 16 4 HARDWARE CONTENTS (shown actual size) AA BB CC M5 x 12 Bolt Assembly M5 x 12 Bolt M5 x 20 Bolt Qty. 4 Qty. 18 Qty. 4 7 DD EE M6 x 12 Bolt ST4.2 x 9.5 Bolt Qty.
Assembly Instructions Choose a good, cleared assembly area and get a friend to help you put your gas fire pit together. Lay cardboard down to protect gas fire pit finish and assembly area. Step 1 Fig. 1 Blade Connector Place the table top frame (A) upside down to the soft, level surface. Insert valve into the injection pipe of burner as position A. Attach control panel assembly (C) to the table top frame (A) with (4) M5 x 12 bolt assemblies (AA) as illustrated.
Assembly Instructions Step 2 Fig. 2 Attach a leg with door magnet (E) and three legs (D) to the table top frame (A) with (12) M6x12 bolts (DD) as illustrated. Hardware Used DD M6 x 12 Bolt x 12 Fig. 3 Step 3 Attach side panel 1 (B) to two legs (D) with (6) M5x12 bolts (BB) as illustrated.
Assembly Instructions Step 4 Fig. 4 Attach cylinder holder pole (F) to two legs (D) with (2) M5x20 bolts (CC) as illustrated. Note: The side with arrow sticker assemble to the leg at front side. Hardware Used CC M5 x 20 Bolt x2 Step 5 Fig. 5 Attach side panel 2 (B) to two legs (D) with (6) M5x12 bolts (BB) as illutrated.
Assembly Instructions Step 6 Attach side panel 3 (B) to a leg (D) and leg with door magnet (E) with (6) M5x12 bolts (BB) as illustrated. Fig.6 Hardware Used BB M5 x 12 Bolt x6 Step 7 Fig.7 Attach another cylinder holder pole (F) to a leg (D) and leg with door magnet (E) with (2) M5x20 bolts (CC) as illustrated. Note: The side with arrow sticker assemble to the leg with door magnet (E).
AssembO\ Instructions Step 8 Fig. 8 Screw cylinder locking bolt (L) to cylinder holder (K) as illustrated. Fig.9 Step 9 DD Attach cylinder holder (K) to cylinder hold poles (F) with (4) M6x12 bolts (DD) as illustrated.
Assembly Instructions Step 10 Fig.10 Screw door handle (J) to door (I) as illustrated. Fig.11 Step 11 Attach door (I) to the leg (D) with (4) ST4.2x9.5 bolts (EE) as illustrated. Note: With the help of a friend, turn the gas fire pit into upright position after this step finished. Hardware Used EE ST4.2 x 9.
Assembly Instructions Step 12 Fig.12 Peel and stick the cushion pads (P) on the table top frame (A) as illustrated, total 16 cushion pads. Note: Before applying the adhesive cushion pads, be sure to wipe down the metal surface and make sure it is free of any dust or debris. Step 13 Fig.13 Put（4）ceramic tiles (Q) on table top frame (A) as illustrated.
Assembly Instructions Step 14 Fig.14 Put the glass chips (N) into the burning area, middle of tabletop. Place the cover lid (M) onto the tabletop when the gas fire pit not use. Note: To avoid ignition failure, do not cover the shield with glass chips. shield WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
INSTALLATION INSTRUCTIONS Fig. 15 I glass chips (max15.43 lb) Open the door (I) assembly. Attach regulator to clylinder and turn clockwise by hand. Make sure the valve outlet of cylinder is facing outward. (Fig.15) 4. Make leakage solution by mixing 1 part liquid dish soap and 3 parts water. Please do the Leak Test with leakage solution before use. (Fig. 16) . Turn the cylinder locking bolt clockwise to secure the gas 5 cylinder. (Fig.17) 6. Hang up the regulator as Fig.
OPERATION WARNING: DO NOT ATTEMPT TO OPERATE THE APPLIANCE UNTIL YOU HAVE READ AND UNDERSTAND ALL PRECAUTIONS. FAILURE TO DO SO CAN RESULT IN PROPERTY DAMAGE, SERIOUS INJURY, OR DEATH. WARNING!!! Do not use an open flame to check for leakage. Do not smoke during testing. Do not test indoors. A leak check must be performed whenever the gas cylinder is replaced. NOTE: Use only the pressure regulator supplied with this fire pit. Replace them with those specified by the manufacturer only.
OPERATION WARNING: DO NOT ATTEMPT TO OPERATE THE APPLIANCE UNTIL YOU HAVE READ AND UNDERSTAND ALL PRECAUTIONS. FAILURE TO DO SO CAN RESULT IN PROPERTY ATION DAMAGE, SERIOUS INJURY, OR DEATH. Before Lighting The gas fire pit should be thoroughly inspected before each use, and by a qualified service person at least annually. If relighting a hot gas fire pit, always wait at least 5 minutes. Lighting Instructions 1. Make sure control knob is in the “OFF” position. OFF 3.
OPERATION CAUTION: AVOID INHALING FUMES EMITTED FROM THE GAS APPLIANCE'S FIRST USE. SMOKE AND ODOR FROM THE BURNING OF OILS USED IN MANUFACTURING WILL APPEAR. BOTH SMOKE AND ODOR WILL DISSIPATE AFTER APPROXIMATELY 30 MINUTES. THE GAS APPLIANCE SHOULD NOT PRODUCE THICK BLACK SMOKE. NOTE: The burner may be noisy when initially turned on. To eliminate excessive noise from the burner, turn the control knob to the “LOW” position. Then, turn the knob to the level of heat desired.
LOCATING FIRE PIT FOR USE CAUTION: WHEN CERTAIN MATERIALS OR ITEMS ARE LEFT ABOVE, BESIDE OR UNDER THIS APPLICANCE WHILE IN USE, THEY WILL BE SUBJECT TO RADIANT HEAT AND COULD BE SERIOUSLY DAMAGED. This gas fire pit is primarily used for the heating of outdoor patios, decks, spas, pools and open working areas. Always make sure that adequate fresh air ventilation is provided. Follow the spacing tolerances shown in Fig. 19 at all times. This gas fire pit must be placed on level, firm ground.
T MAINTENANCE AND STORAGE CLEANING AND MAINTENANCE : To enjoy years of outstanding performance from your gas fire pit, make sure you perform the following maintenance activities on a regular basis: Keep exterior surfaces clean. Use warm soapy water for cleaning. Never use flammable of corrosive cleaning agents. WARNING: FOR YOUR SAFETY ; DO NOT touch or move gas appliance for at least 45 minutes after use. Allow all burner elements to cool before touching.
MAINTENANCE AND STORAGE Store the fire pit indoors during the winter if it will be subjected to freezing temperatures. Disconnect and remove the cylinder from the appliance before the appliance can be stored indoors. STORAGE Turn the control knob to "OFF" position. Turn LP cylinder to OFF position.
TROUBLE SHOOTING PROBLEM OBSERVED POSSIBLE CAUSE CORRECTIVE MEASURES Gas odor Gas leak Check all gas connections Delayed ignition Low gas pressure. Clogged or dirty burner ports. Check gas supply pressure. Clean burner parts--see manual. "CLEANING AND MAINTENANCE" section. Incorrect burner flame Incorrect gas supply or pressure. Clogged or dirty burner ports. Check gas supply pressure. Clean burner parts.
Warranty Information The appliance has been manufactured under the highest standards of quality and workmanship. We warrant to the original consumer purchaser that all aspects of this product will be free of defects in material and workmanship for one year from the date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine parts are not covered by this warranty.
