Instructions / Assembly

16
INSTALLATION(MODEL NO. SRCH11033)
2. a) Install handle (2) and handle support (1) 4 with self-tapping screws on the top
1. Attach the lift control knob (37) to the position with 1 M4X8 bolt.
3. a) Unscrew 4 M5X10 bolts from the left & right supports (42).
b) Divide the left & right supports (42) and reinstall them as illustrated, to enhance the
product stability.
surface of heater as diagram.
b) Insert the knob (40) and make sure the “OFF” position is matchable shown in diagram.
42
2
40
1
M5X10 bolt
M4x8 bolt
37