Spec Sheet

SELECT OAK 24” LOG PLACEMENT

STEP 1

Place back log, #958

FOR BEST RESULTS WE RECOMMEND THAT YOU PLACE YOUR

GLOWING EMBERS ON THE BURNER BEFORE SETTING UP YOUR

LOG SET. SEE THE INSTRUCTION MANUAL THAT WAS SUPPLIED

WITH THE BURNER HEARTH KIT.

STEP 2

Place right front log, #953

958

953

PAGE 1
SELECT OAK 24” LOG PLACEMENT FOR BEST RESULTS WE RECOMMEND THAT YOU PLACE YOUR GLOWING EMBERS ON THE BURNER BEFORE SETTING UP YOUR LOG SET. SEE THE INSTRUCTION MANUAL THAT WAS SUPPLIED WITH THE BURNER HEARTH KIT.
PAGE 2
SELECT OAK 24” LOG PLACEMENT STEP 3 Place left front log, #952 952 STEP 4 Place log, # 954 954
PAGE 3
SELECT OAK 24” LOG PLACEMENT STEP 5 Place log, # 956 956 STEP 6 Place log, # 957 957
PAGE 4
SELECT OAK 24” LOG PLACEMENT STEP 7 Place log, # 955 955 STEP 8 Place log, # 332 332
PAGE 5
SELECT OAK 24” LOG PLACEMENT STEP 9 Place logs, # 356 & 354 356 354 STEP 10 Place logs, # 905, 907 & 3– CC03 905 907 CC03
PAGE 6
SELECT OAK 24” LOG PLACEMENT 958 953 952 954 956 955 907 332 957 356 CC03 X 3 905 354
PAGE 7
SELECT OAK 30” LOG PLACEMENT FOR BEST RESULTS WE RECOMMEND THAT YOU PLACE YOUR GLOWING EMBERS ON THE BURNER BEFORE SETTING UP YOUR LOG SET. SEE THE INSTRUCTION MANUAL THAT WAS SUPPLIED WITH THE BURNER HEARTH KIT.
PAGE 8
SELECT OAK 30” LOG PLACEMENT STEP 3 PLACE LOGS:954 & 1020 1020 954 STEP 4 PLACE LOGS: 957 & 955 955 957
PAGE 9
SELECT OAK 30” LOG PLACEMENT STEP 5 PLACE LOGS: 332, 356 & 354 332 356 354 STEP 5 PLACE LOGS: 905, 907 & 3– CC03 905 907 CC03
PAGE 10
SELECT OAK 30” INDIVIDUAL LOGS 1021 1018 1017 954 907 1020 354 332 356 CC03 X 3 957 905