Spec Sheet

WARNING: It is imperative that the flame does not come into contact with the logs. Some adjustment

with the logs in the notches may be required in order to ensure that there is no impingement. It is the

installers’ responsibility to ensure proper log placement and adjustment.

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically

approved with this appliance will result in property damage or personal injury

FOR HM2 SERIES BURNER ONLY

24” CAPE FEAR OAK LOG PLACEMENT

Step 1: Place log # 819 back log

Step 2: Place log # 820 middle log

PAGE 1
24” CAPE FEAR OAK LOG PLACEMENT FOR HM2 SERIES BURNER ONLY Step 1: Place log # 819 back log Step 2: Place log # 820 middle log WARNING: It is imperative that the flame does not come into contact with the logs. Some adjustment with the logs in the notches may be required in order to ensure that there is no impingement. It is the installers’ responsibility to ensure proper log placement and adjustment.
PAGE 2
4” CAPE FEAR OAK LOG PLACEMENT FOR HM2 SERIES BURNER ONLY Step 3: Place log # 821 front log Step 4: Place the top logs # 818,817 & 816 #817 #818 Left log #816 Right log
PAGE 3
24” CAPE FEAR OAK INDIVIDUAL LOGS #819 Back log #820 Middle log #821 Front log #818 Left log #816 Right log #817