Spec Sheet

ManualsBrandsHeatmaster ManualsFireplace/Gas Stove Accessories24" Stainless Steel DGSS Outdoor Burner Match Light with Safety Pilot Kit Natural Gas in Silver

Blue Ridge Blaze / Western Blaze 18” on DGSS Burner

STEP 1. Place 2 brick risers at back of grate as shown here.

STEP 2. Place the back log H-0637 on top of the brick risers. Place log H-0808 as shown below.

Then place logs H-0811 & H-0810 on the ﬂoor in front of the grate.

STEP 3. Place the right log H-0800 & H-0803 as shown below.

H-0808

H-0637

H-0811

H-0803

H-0800

H-0810

Summary of content (9 pages)

PAGE 1
Blue Ridge Blaze / Western Blaze 18” on DGSS Burner STEP 1. Place 2 brick risers at back of grate as shown here. STEP 2. Place the back log H-0637 on top of the brick risers. Place log H-0808 as shown below. Then place logs H-0811 & H-0810 on the ﬂoor in front of the grate. H-0637 H-0808 H-0811 H-0810 STEP 3. Place the right log H-0800 & H-0803 as shown below.
PAGE 2
Blue Ridge Blaze / Western Blaze 18” on DGSS Burner STEP 4. FIRST, place log H-0806. Then place log H-801 as shown below. H-0806 STEP 5. FIRST, place log H-0804. Then place log H-0802 as shown below.
PAGE 3
Blue Ridge Blaze / Western Blaze 18” Logs H-0637 Brick riser A-0305 x 2 H-0808 H-0806 H-0804 H-0800 H-0810 H-0801 H-0811 H-0803 H-0802
PAGE 4
Blue Ridge Blaze / Western Blaze 24” on DGSS Burner STEP 1. Place 2 brick risers at back of grate as shown here. STEP 2. Place the back log H-0809 on top of the brick risers. Then place logs H-0811 & H-0810 on the ﬂoor in front of the grate. H-0809 H-0811 H-0810 STEP 3. Place the 2 front logs H-0815 & H-0808 as shown below. H-0815 H-0808 STEP 4. Place logs H-0806 & H-807 ﬁrst as shown below. Then place logs H-0805 & H-0800.
PAGE 5
Blue Ridge Blaze / Western Blaze 24” on DGSS Burner STEP 5. Place logs H-0802 & H-803 as shown below. H-0802 H-0803 STEP 6. Place logs H-0804 & H-801 as shown below.
PAGE 6
Blue Ridge Blaze / Western Blaze 24” Logs H-0809 Brick riser A-0305 x 2 H-0815 H-0808 H-0806 H-0805 H-0804 H-0807 H-0800 H-0810 H-0811 H-0801 H-0803 H-0802
PAGE 7
Blue Ridge Blaze / Western Blaze 30” on DGSS Burner STEP 1. Place 2 brick risers at back of grate as shown here. STEP 2. Place the back log H-0631 on top of the brick risers. Place logs H-0815 & H-0808 as shown below. Then place logs H-0811 & H-0810 on the ﬂoor in front of the grate. H-0631 H-0815 H-0808 H-0811 H-0810 STEP 3. Place log H-0806 as shown below. H-0806 STEP 4. Place logs H-807, H-0805 & H-0800 as shown below.
PAGE 8
Blue Ridge Blaze / Western Blaze 30” on DGSS Burner STEP 5. Place logs H-0802 as shown below. H-0802 STEP 6. Place logs H-0803, H-0804 & H-0801 as shown below.
PAGE 9
Blue Ridge Blaze / Western Blaze 30” Logs H-0631 Brick riser A-0305 x 2 H-0815 H-0808 H-0806 H-0805 H-0804 H-0807 H-0800 H-0810 H-0811 H-0801 H-0803 H-0802