Indoor Fireplace User Manual
29Heatilator • ECO-WINS18 • 7065-132B • August 29 2011
G. Tools And Supplies Needed
H. Fire Safety
To provide reasonable re safety,the following should be
givenseriousconsideration:
1. Install at least one smoke detector on each oor of
your home to ensure your safety. They should be
located away from the heating appliance and close
to the sleeping areas. Follow the smoke detector
manufacturer’splacementandinstallationinstructions,
andbesuretomaintainregularly.
2. A conveniently located ClassA fire extinguisher
to contend with small fires resulting from burning
embers.
• Removeapplianceandcomponentsfrompackagingand
inspectfordamage.
• Ventsystemcomponentsandsurroundsareshippedin
separatepackages.
• Reporttoyourdealeranypartsdamagedinshipment.
• Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety and
benet.
I. Inspect Appliance and Components
1. Placetheapplianceinalocationnearthenal
installationareaandfollowtheproceduresbelow:
2. Opentheapplianceandremoveallthepartsand
articlespackedinsidetheComponentPack.Inspect
allthepartsandglassforshippingdamage.Contact
yourdealerifanyirregularitiesarenoticed.
3. Allsafetywarningshavebeenreadandfollowed.
4. ThisOwner’sManualhasbeenread.
5. Floorprotectionrequirementshavebeenmet.
6. Ventingisproperlyinstalledperventmanufacturing
instructions.
7. Theproperclearancesfromtheapplianceandchim-
neytocombustiblematerialshavebeenmet.
8. Themasonrychimneyisinspectedbyaprofessional
andisclean,orthefactorybuiltmetalchimneyis
installed according to the manufacturer’s instruc-
tionsandclearances.
9. Thechimneymeetstherequiredminimumheight.
10.
Alllabelshavebeenremovedfromtheglass
door.
11. Plated surfaces have been wiped clean, if appli-
cable.
12. A power outlet is available nearby for use of the
blowerassembly.
Inspectapplianceandcomponentsfordamage.
Damagedpartsmayimpairsafeoperation.
WARNING
• DoNOTinstalldamagedcomponents.
• DoNOTinstallincompletecomponents.
• DoNOTinstallsubstitutecomponents.
Reportdamagedpartstodealer.
Fire Risk.
Pre-Burn Check List
7/16Socket Framingmateria
Reciprocatingsaw Hightempcaulkingmateriall
Pliers Gloves
Hammer Framingsquare
Phillipsscrewdriver Electricdrillandbits
Flatbladescrewdriver Safetyglasses
Plumbline Tapemeasure
Level
WireCutterstoremovefrompallet
1/2-3/4in.length,#6or#8self-drillingscrews
Misc.screwsandnails
Beforebeginningtheinstallationbesurethefollowingtools
andbuildingsuppliesareavailable: