Troubleshooting Guide

ManualsBrandsHeath ManualsElectronicsWireless Door Chime Transmitter

1

2

3

4

5

6

7

8

9

Helpful Videos – www.hzsupport.com Helpful Answers – 1-800-858-8501

2

3. Mount push button. Use either screws or

double sided tape to mount push button.

• Screw Mounting: To mount with screws,

remove back of case by inserting a small

screwdriver into the slot on the top or bot-

tom of the push button and twisting (see

Figure 2). Note: Remove material in screw

holes (if needed) before mounting with

screws. Attach back of case to door jamb

or wall (see Figure 3). Snap front of push

button on.

• Tape Mounting: When attaching push but-

ton using double sided tape, make sure the

surface of the door jamb or wall is clean.

Figure 3

Figure 2