User's Manual

14
FAQs
HOW DO I CONNECT MY NOTIFI ELITE TO MY NEW ROUTER?
There are two possible options for reconnecting the Notifi Elite doorbell to your new router:
• OPTION 1 – Press and hold the push button on the Notifi Elite for 30 seconds. This will place the Notifi Elite into a
discoverable state. Follow step 4 under Setup to connect the Notifi Elite to the new router.
• OPTION 2 – Remove the transformer (TRANS) wire from the chime. Wait 2 minutes. Reconnect the wire. This will place the
Notifi Elite into a discoverable state. Follow step 4 under Setup to connect the Notifi Elite to the new router.
I CHANGED MY WI-FI PASSWORD, HOW DO I RECONNECT MY NOTIFI ELITE?
There are two possible options for reconnecting the Notifi Elite doorbell to your router:
• OPTION 1 – Press and hold the push button on the Notifi Elite for 30 seconds. This will place the Notifi Elite into a
discoverable state. Follow step 4 under Setup to connect the Notifi Elite to the router.
• OPTION 2 – Remove the transformer (TRANS) wire from the chime. Wait 2 minutes. Reconnect the wire. This will place the
Notifi Elite into a discoverable state. Follow step 4 under Setup to connect the Notifi Elite using the new wi-fi password.
HOW DO I CHANGE THE TUNE ON MY MULTI-TUNE ELECTRONIC CHIME?
The Notifi Elite doorbell uses the power module to route the power going to the chime directly to the Notifi Elite. When the
push button is pressed, power is sent to the chime and it plays the selected tune. In order to change the tune on a multi-tune
electronic chime, the chime requires power. Follow these steps to temporarily supply power to the chime in order to change the
tune. NOTE: This process may be easier with the help of a second person.
• Open the Notifi app and navigate to the “Chime Selection” screen (
> Advanced Settings > Chime Selection).
• Change the “Tune Duration” to 10 seconds.
• Press the push button on the Notifi Elite doorbell. Each press of the push button will send power to the chime for a period of
10 seconds.
• While the chime is receiving power (10 seconds), change the selected tune according to the chime’s instruction manual. If
the power to the chime times out, press the push button again and continue the tune selection process.
• Once the desired tune is selected, adjust the “Tune Duration” setting to match the length of the selected tune.
WHAT ARE THE DIFFERENT LED INDICATORS?
The LED halo around the push button shows different Notifi Elite status indicators:
LED INDICATOR ISSUE
Flashes Blue-Red, Blue-Red continuously. Wi-Fi not connected during initial installation.
Glows steady Blue. Wi-Fi is connected (Normal state).
LED indicator is off. Push Button is pressed.
Flashes Blue-OFF, Blue-OFF continuously. Wi-Fi not connected after initial installation.