Installation Instructions

4
204069-01
Wiring Diagram 1
(Standard)
Wiring Diagram 2
OPTIONAL WIRING
isxtureisprovidedwithasensorratedfor360Watts.Sincethextureisonlyrated100Watts,260Wattsofadditional
lightingmaybecontrolledbythissensor.
Whendeterminingwhataxtureisratedfor,donotsimplylookattheratingonthebulbinthexture.Lookatthe
markingwhichspeciesthemaximumbulbwattageforwhichthextureissuitable.
Onceyouhaveselectedthexturestobeconnectedanddeterminedtheirmaximumratings,addtheseratingsup.
Forinstance,ifyouhave3xturesrated100Watts,150Watts,and75Wattsrespectively,youhaveatotalloadof325
Watts.
Wiring Diagram 1 – When wiring to control a standard light xture:Stripthemotionsensor’sredwireandcon-
necttothestandardlight’sblackwire.Connectallwhitewirestogether.Totalxtureratingsmustnotexceed360Watts
(3.0A).
Wiring Diagram 2 – When wiring to control another motion sensing light xture (Master / Slave):Stripthe
redwireinbothlightxtures.Connecttheredwireofthecontrolling(master)xturetothered and blackwiresofthe
controlled(slave)xture.Connectallwhitewirestogether.Totalxtureratingsmustnotexceed360Watts(3.0A).
Wiring Diagram 3 – When wiring so either motion light turns on the both motion lights (Master / Master):
Striptheredwireinbothlightxtures.Connecttheredwireofonexturetotheredwireofthesecondxture.Note:
Inmostinstallations,anadditionalwire(samegaugeasexistinghousewire)willhavetobeinstalledinthehouseto
connectthetwoxturesasmaster/master.Connectallwhitewirestogetherandallblackwirestogether.Totalxture
ratingsmustnotexceed360Watts(3.0A).
Master
Wiring Diagram 3
Black
White
Red
Green or
Bare
Slave
Black
White
Red
Green or
Bare
Master
Black
White
Red
Green or
Bare
Master