Installation Instructions

3
204069-01
WIRING
One Motion Light
Two Motion Lights
Recommended Grounding Method
Useagreenground“pigtail”(notprovided)andtwist
oneendtogetherwiththebarexturewireandthe
boxgroundwire.Securewithawireconnector.Secure
theotherendofthe“pigtail”withtheGNDscrewon
theX-bar.
CAUTION: DO NOT connect the RED wire unless
you want to control other lights from the motion
sensor (see Optional Wiring).
Black to black
White to white
Note: All wiring must be run in accordance with the
NationalElectricalCodethroughconduitoranotherac-
ceptablemeans.Contact a qualied electrician if there is
any question as to the suitability of the system.
WARNING: Turn power o at circuit breaker
or fuse.
Ifyouhavemetaljunctionbox,youmaynotneedthegreen
“pigtail”.Ifyouareunsureaboutthegroundingmethod,
consultyourlocalbuildingcode.
Connectthe xture wiresto thewiresin the junction
box.Twistthewirestogetherandsecurewithwirecon-
nectors.
Black
White
Green or
Bare
Black
White
Green or
Bare